How to Upgrade the Performance of a Subaru Forester

Written by cassie skelley
  • Share
  • Tweet
  • Share
  • Email

The Forester is an SUV made by Subaru that has a four-cylinder engine and plenty of space for cargo and passengers. The vehicle's performance can be upgraded by doing basic maintenance and installing aftermarket modifications. These upgrades will help boost the gas mileage, acceleration and speed of your Subaru Forester.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Oil change
  • High-performance oil filter
  • Coolant additive
  • Performance spark plugs
  • Performance spark plug wires
  • Cold-air intake kit
  • High-flow air filter
  • Flexible intake tubing
  • Mesh screen
  • Turbine

Show MoreHide

Instructions

  1. 1

    Clean out your car to get rid of any excess weight -- even the spare tire if you can do without it. Removing unneeded items decreases the weight of your car, which increases your gas mileage.

  2. 2

    Get regular oil changes and when you do, use synthetic oil. Synthetic oil lubricates the engine better, allowing for better wear protection and friction reduction on the vehicle engine. Use a high-performance oil filter to allow for a higher oil pressure rate.

  3. 3

    Use additives in your vehicle's coolant reservoir that keep the coolant cooler. A product called Water Wetter, for example, reduces the temperature of the coolant by -1.11 degrees Celsius, which allows for better heat transfer and optimum engine efficiency. A coolant additive also helps prevent engine corrosion and rust.

  4. 4

    Change your spark plugs to performance spark plugs. Upgraded spark plugs usually have a platinum tip that allows for a better spark. Switch to high-performance spark plug wires also for a stronger signal to your spark plugs. These changes will improve gas mileage by allowing your engine to create better combustion.

  5. 5

    Install a cold-air intake kit and a high-flow air filter. Installing a cold air intake allows for smoother air flow into the engine, which increases engine power. Connect flexible intake tubing from the cold-air intake filter to an area behind your front headlight or below your vehicle's grille, where there is an opening that the tubing can be connected to. Install a mesh screen into the tubing to prevent particles from being sucked through while you are driving. Install a turbine into the air tubing between the intake tube and air filter. The turbine sucks air into the intake tube in a twirling forced motion, giving your vehicle added horsepower.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.