How to Make an LED Display Board

Written by rita wood
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make an LED Display Board
LED displays are a great way to advertise. (ï¼"ã'ã''ã'---LED image by kelly marken from

An LED display board is a video display that uses light-emitting diodes. LED display boards are typically used on billboards or store signs to advertise businesses or relay a message. They are also used in public transport vehicles or destination signs. If you make the LED display board yourself, you can use different coloured lights on the LED display, and decorate it any way you wish.

Skill level:

Other People Are Reading

Things you need

  • Sturdy, flat piece of cardboard
  • Scissors
  • LED lights
  • 22-gauge wire
  • 4 AA batteries and holder
  • Wire cutters
  • Soldering iron and solder
  • Drill or drill press (optional)
  • Wire cutters
  • Paint (optional
  • Sharp pencil
  • Glue

Show MoreHide


  1. 1

    Start off with a piece of cardboard. Cut the cardboard the size and shape you want your display. Spray-paint the cardboard any colour you want, if you desire. You can be creative with the cardboard and paint it any way you like, using different colours and patterns if you desire.

  2. 2

    Measure and mark a grid with spaces 3/4 inch apart on the cardboard. Drill small 1/16-inch holes using a hand-held drill or a drill press if you have one. If you have neither, a sharp pencil will work.

  3. 3

    Put the LEDs through the holes. Run the column wires down the back of the array, and run the row wires across to the front. This makes it easier to keep the wires from touching each other and shorting out. The positive ends of the LEDs are connected electrically. This means the negative ends connect to each other. Soldering the wires provides the connection and support for the wires between the LEDs.

  4. 4

    Connect the positive end of the wires of the LEDs to the positive end on the battery holder. Connect the negative end of the wires of the LEDs to the negative end of the battery holder. You can solder these wires, but if you do not have a solder kit, you can twist the wires.

  5. 5

    Light up the LEDs by inserting the batteries into the holder. When the batteries are inserted, the LEDs light up. Pull one battery out when you want to turn off the display.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.