Okidata C3200 Transfer Belt Instructions

Written by alexander gokhfeld
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Okidata C3200 Transfer Belt Instructions
Printer transfer belt (imprimerie image by Yves Damin from Fotolia.com)

The Okidata OKI C3200 is a single-pass desktop colour printer featuring 1,200 x 600 dpi resolution and USB 2.0 interface. The use of the LED technology allows reliable and faster printing than with standard laser printers. The transfer belt of the OKI C3200 moves the print media from one side of the printer to the other and sustains the electrical charge for transfer of the toner to the media. The manufacturer recommends that you replace the transfer belt after printing 50,000 pages.

Skill level:
Moderately Easy

Other People Are Reading

Instructions

  1. 1

    Press the cover release and open the top cover of the printer. Note the positions of the four cartridges.

  2. 2

    Remove all image drum units from the printer and store them away from the direct exposure to heat and light.

  3. 3

    Locate the two blue locks at each side of the belt and the handle at the front end.

  4. 4

    Turn the two lockers 90 degrees to the left to release the belt from the printer chassis. Pull up the handle and lift the belt unit out of the printer.

  5. 5

    Lower the new belt unit into the printer with the handle at the front. Turn the two belt lockers 90 degrees to the right until they lock to secure the belt unit in the printer.

  6. 6

    Place the four image drums with their toner cartridges into the printer. Close and lock the top cover of the printer.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.