How to make a magic wrap dress

Written by gabrielle black
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a magic wrap dress
Wrap dresses can be worn over swimming apparel because they are easily removable. (bauch image by Stefan Häuselmann from

Creating a magic wrap dress is an easy way to express yourself with this one-of-a-kind wardrobe item. Magic wrap dresses are made of two layers of flowing fabric -- one sheer and one opaque. These dresses are reversible, adding to their versatility. Wrap dresses can be worn in various configurations and tend to be very flattering to a woman's shape. Knowledge of basic sewing skills and previous experience with a sewing machine are recommended for this project.

Skill level:

Things you need

  • Tape measure
  • Sheer fabric
  • Opaque fabric
  • Sewing scissors
  • Sewing machine
  • Straight pins
  • Ribbon

Show MoreHide


  1. 1

    Measure your waist, hips, chest, and desired dress length (from your armpits to mid-thigh or lower) using the tape measure.

  2. 2

    Use the sewing scissors to cut the two layers of fabric to be four inches longer than the desired dress length and up to twice as wide as your chest measurement. The fabric should be wide enough to wrap around your body at least one and a half times.

  3. 3

    Hem the sides and bottoms of each piece of fabric on the sewing machine with a 1/2-inch seam allowance.

  4. 4

    Lay the two pieces of fabric on top of each other so that the back sides of the fabric are facing each other. Fold the tops of the fabric down 1/2 inch and pin together. Fold the top down again 3 inches and pin in place. This will create a pocket at the top of the fabric for the wrap tie or ribbon to go through.

  5. 5

    Sew the pocket of the wrap with a seam that is 2 3/4 inches from the top using the sewing machine. Insert ribbon into the pocket. Ribbon should be 2 feet longer than the width of the wrap.

  6. 6

    Find the centre of the wrap. Cut a small hole through the pocket and the ribbon inside the pocket at the centre point. Sew around the hole to secure the ribbon in place and to prevent the hole from tearing or unravelling. This hole will be used for various wrapping and tying techniques.

Tips and warnings

  • Iron the seams and pocket to keep them flat and straight during the construction of the wrap.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.