How to calculate gutter and downspout capacity

Updated February 21, 2017

Gather some basic weather information to calculate the proper size for gutters and downspouts for a house. The total rainfall and how rapidly it falls will affect the runoff from the roof. Two and a half centimetres (1 inch) of rain is not much, but it if falls in half an hour it could flood a gutter. Total roof area also affects runoff. A roof of 111 square metres (1,200 square feet) in size will collect more water than one that is 56 square metres (600 square feet). Pitch or steepness also is a factor. Water will run off faster from a very steep roof than from one with a gradual slope.

Measure the roof to get the watershed area, the area from which water will run off. Multiply length (peak to eave) by width to determine square metreage. Write down those dimensions. Note places where two roofs form a valley, which will affect runoff because water will come from two sides. Note logical places for downspouts, like building corners.

Find the rainfall intensity for your locale. Rainfall intensity is measured in a 5-minute interval, translated to cm per hour. The Met Office calculates and keeps these figures.Tables are available that show rainfall intensity for most metropolitan areas. Find out how often major storms occur -- intensities that are exceeded only once in 10 years or once in 100 years. These tables are available, too. If your community does not have these, use the figures for the closest community.

Divide the cm per hour watershed of the roof by the 5-minute rainfall intensity. That is how much rain a roof can drain during the most intense rainfall. That will show how much water a gutter will have to drain. Ask gutter suppliers what size gutters will be needed to handle that amount. Measure the length of the gutter for downspout locations. The number of downspouts will affect a gutter's ability to handle water. Increasing from one downspout to two doubles the capacity of a gutter to handle runoff without overflowing.

Size downspouts to fit the gutter. Six and a half square cm (1 square inch) of downspout can drain 111 square metres (1,200 square feet) of roof during a rain with an intensity of 2.5 cm (1 inch) per hour. Roof area, the locale's rainfall intensity and gutter capacity determine how many square cms of downspout are needed. Doubling the number of downspouts halves the required capacity for each. A round downspout is slightly more efficient in draining water than square or rectangular ones.


Many online resources provide rainfall figures and tables or formulas for calculating gutter and downspout size. A gutter supplier or building supplier should also have these tables.


Gutter slope will affect drainage. A gutter should not slope by more than 2.5 cm (1 inch) in 5 m (17 feet). It will take two downspouts to drain a 6 m (34 foot) gutter.

Things You'll Need

  • Tape measure
  • Rainfall data
  • Calculator
Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Bob Haring has been a news writer and editor for more than 50 years, mostly with the Associated Press and then as executive editor of the Tulsa, Okla. "World." Since retiring he has written freelance stories and a weekly computer security column. Haring holds a Bachelor of Journalism from the University of Missouri.