Blocking diodes are one-way valves used in electrical circuits. When building your own wind dynamo chargers or solar power systems to charge batteries or create AC power, blocking diodes can be extremely important to prevent charge from flowing backwards, draining your battery bank. When there is low wind, in the case of a wind dynamo, or at nighttime, in the case of a solar panel, a blocking diode becomes particularly important.
- Skill level:
Other People Are Reading
Things you need
- Blocking diode
- 12-gauge AWG cable
- Electrical circuit
Acquire a blocking diode capable of blocking the maximum possible current that your generator can produce -- this is the theoretical maximum that could ever flow backwards from your batteries.
Wire the generator or solar panels to the 12-gauge AWG cable. Connect positive terminals to the black wire and negative terminals to the white wire. Connect green wire to the motor/panel casing, to serve as a ground. Wire the AWG cable to the blocking diode.
Wire the blocking diode to the charge controller, which is configured precisely for your voltage and motor settings according to manufacturer's instructions. Wire the charge controller both to a dump load, which will avoid overheating of your batteries in the event that too much current is sent towards your batteries, and to the battery bank. Your blocking diode will function to prevent current from flowing backwards from the charge controller.
Tips and warnings
- Since your blocking diode does not prevent too much charge from flowing downstream to your batteries, the use of a dump load is necessary.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for