How to Do an Audi LED Conversion

Written by angelo elia
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Do an Audi LED Conversion
Perform a headlight LED conversion on the Audi. (VOITUE (avant) ref 1459 image by Marie-Thérèse GUIHAL from

Audi is a European automobile manufacturer of luxury vehicles, including the Audi A4. If the headlight bulbs go out on your Audi, it can impair the driver's visibility of the road. Therefore, the Audi's headlight bulbs will have to be taken out and replaced with new ones, including LED headlight bulbs. You can replace the headlight bulbs on the Audi A4 with LED headlight bulbs, also known as an Audi LED conversion, with these easy steps.

Skill level:

Things you need

  • T25 Torx screwdriver
  • Extension piece
  • Piece of Cloth

Show MoreHide


  1. 1

    Open the Audi's bonnet.

  2. 2

    Unscrew the two screws from above the Audi's headlights, using a T25 Torx screwdriver, turn them counterclockwise.

  3. 3

    Loosen the two screws from the sides of the headlights, using a T25 Torx screwdriver attached to an extension piece.

  4. 4

    Push on the clips from the rear of the headlights to detach the wiring.

  5. 5

    Pull the headlight bulbs outwards with a piece of cloth placed over the headlight bulbs.

    How to Do an Audi LED Conversion
    Remove the Audi's headlight bulbs. (luxury coupe image by goce risteski from
  6. 6

    Push in the new LED headlight bulbs.

  7. 7

    Reattach the wiring and the T25 screws that were removed and then close the bonnet of the vehicle.

Don't Miss


  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.