How to Thread a Baby Lock Sewing Machine

Written by james andrews Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Thread a Baby Lock Sewing Machine
Unlike newer models, older Baby Lock sewing machines must be threaded manually. (Sewing machine image by Susanne Karlsson from Fotolia.com)

Baby Lock produces a wide range of sewing machines and while the majority of its latest models feature automatic needle threaders, some of the firm's older machines can only be threaded by hand. While that might sound daunting to beginners or those of you who have not used a sewing machine for a long time, the threading process is a fairly straightforward task, even for those who do not possess nimble fingers. Baby Lock models that must be threaded manually include the BL 1550, BL 2000 and BL 2100.

Skill level:
Easy

Other People Are Reading

Things you need

  • Spool of thread
  • Needle
  • Baby Lock sewing machine

Show MoreHide

Instructions

  1. 1

    Ensure the Baby Lock machine is turned off by either switching its power button to the off position, or removing its plug from the wall or floor socket.

  2. 2

    Place the needle in the machine's needle holder and raise it to its highest point by slowly rotating the handwheel toward you in a clockwise direction.

  3. 3

    Raise the presser foot and place the spool of thread on the horizontal or vertical spool pin depending on your specific Baby Lock model. If it is a horizontal spool pin, then make sure you fit the spool cap in place, or the thread could come loose and tangle during operation.

  4. 4

    Identify the various threading points on the top of the machine's exterior and pass the thread through all of them before leading it down toward the tension mechanism.

  5. 5

    Pull down a few inches of thread and lead it through the tension mechanism, the take up lever, and, finally, the thread guide located above the needle.

  6. 6

    Thread the needle from front to back. Lower the presser foot and turn on the Baby Lock.

  7. 7

    Check if you have successfully completed the threading process by placing a piece of fabric underneath the presser foot and sewing for a few seconds.

Don't Miss

Resources

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.