DISCOVER
×

How to Clean Paving Slabs

Updated February 21, 2017

Paving slabs are slabs of concrete, rock or stone that are used to make patios, walkways or driveways. The slabs can be one solid slab of material, or small tile-sized or brick-sized slabs that can be combined to create a design or pattern. The paving slabs should be cleaned as needed to remove dirt and weather stains. Concrete, rock and stone are all very porous and easily absorb liquids. Therefore it's important never to use chemicals or cleaning agents that can be absorbed by the paving slabs and cause discolouration.

Use a hose on the highest setting to spray dirt and dust from the paving slabs.

Mix 2 tbsp of liquid dish soap per gallon of hot water in a bucket.

Dip a mop in the solution. Mop the paving slabs.

Dip a cleaning brush in the solution. Rub the solution onto stains or embedded dirt that has not been removed by mopping.

Rinse all soap residue away from the paving slabs by spraying them with a hose.

Allow the paving slab to air dry.

Things You'll Need

  • Hose
  • Bucket
  • Dish soap
  • Mop
  • Cleaning brush
Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Kallie Johnson began her writing career in 2009, contributing to various online publications. She holds a Bachelor of Arts in English from the University of Nevada, Las Vegas. She enjoys writing home and garden topics and considers herself an expert on do-it-yourself home improvement topics.