An Andersen sliding door is held in place at the top and bottom. Rollers inside the top and bottom of the door slide on guide ribs within the door frame's upper and lower channels. As debris builds up on these guide ribs, the rollers can begin to stick and squeak when the door is opened and closed. A non-oil-based lubricant applied to the rollers keeps them working properly and stops squeaks. Andersen recommends the use of a dry-silicone spray.
- Skill level:
Other People Are Reading
Things you need
- Flathead screwdriver
- Dry-silicone spray lubricant
Wipe the door track with a clean rag to remove all debris that may be inhibiting proper roller movement.
Remove the roller-adjustment caps located on the bottom of the operating panel using a flathead screwdriver.
Spray the rollers using a dry-silicone spray lubricant. Replace the adjustment caps.
Slide the door back and forth until the squeaking stops.
Tips and warnings
- Using anything other than a dry-silicone spray lubricant will cause the rollers to slide rather than roll.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for