How to install CB linear amplifiers

Updated February 21, 2017

A linear amplifier is installed inline between the antenna output of a CB radio and the antenna connected to the unit. The amplifier takes the output of the radio and boosts the signal, resulting in improved transmission distance in most cases. Linear amplifiers may be designed for home or mobile applications, with the primary difference being the power connections each requires.

Place the amplifier near the radio, with 3 to 4 inches of ventilation space around the edges of the amplifier, for a home base. In a mobile application, find a spot that has several inches of ventilation room and is close to the radio. For an amplifier for mobile use, use a screwdriver and the accompanying mounting hardware to securely fasten the amplifier.

Unplug the antenna connected to your CB radio. Plug the antenna into the antenna jack located on the amplifier.

Plug the amplifier's jump lead into the CB radio's antenna jack. Connect the plug or set of terminals on the other end of the jump lead to the input jack on the amplifier.

Plug the power cord of a home amplifier into a wall outlet, and switch the power on to operate the amplifier. For a mobile unit, attach the red and black power cords to the red and black power cables of your CB radio.


Power output of CB radios is restricted by law. Check FCC regulations to ensure that you're within legal limits.

Things You'll Need

  • Linear amplifier
  • Screwdriver
Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Based in Virginia, Nichole Liandi has been a freelance writer since 2005. Her articles have appeared on various print and online publications. Liandi has traveled extensively in Europe and East Asia and incorporates her experiences into her articles. She holds a Bachelor of Arts in history from West Virginia University.