How to make a peace sign stencil

Written by christina ash
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to make a peace sign stencil
The universal love and peace sign. (peace sign image by Jocky from Fotolia.com)

Hippies, beads and the peace sign - all these are associated with the love and peace vibrations of the middle and late 1960s. The peace sign, similar to an upside down "Y" inside a circle, has come to be a symbol that is universally recognised. Designed in 1958, the symbol first represented the campaign for nuclear disarmament in Britain. It later came to symbolise the worldwide peace movement. With some basic supplies, you can make your own stencil of this iconic sign.

Skill level:
Easy

Other People Are Reading

Things you need

  • Stiff cardboard
  • Pencil
  • Compass
  • Round plates or glasses
  • Ruler
  • Scissors or craft knife
  • Acrylic gloss or varnish
  • Foam brush

Show MoreHide

Instructions

  1. 1

    Place the stiff cardboard on a flat surface and draw a circle on it the size you want the finished stencil to be. Use the compass for this or draw around a plate or a glass. Mark the centre of the circle with a small dot.

  2. 2

    Draw a second circle, with the same centre as the first circle, about 1/2 inch inside the first. Adjust the compass for this or use a smaller plate or glass. This forms the rim of the sign.

  3. 3

    Draw a line, using the ruler and pencil, from the top of the larger circle down through its centre to the bottom. Draw a line for from the left side of the larger circle through the centre to the right side. These are the reference lines.

  1. 1

    Draw lines on either side of the vertical reference line, about 1/4 inch away, from the top of the circles to the bottom. This forms the vertical stem of the sign, which is usually the same width as the rim of the sign. Change the distance of the lines from the centre line if the stem is too wide or too narrow.

  2. 2

    Draw a line from the centre to the lower left-hand side of the circles, at a point halfway between the two reference lines. Draw additional lines on either side of this line, the same distance away as the top stem lines.

  3. 3

    Repeat this for the right-hand side of the stencil. You now have a vertical stem and an upside down "V".

  1. 1

    Lightly shade the stencil rim between the two circles and the three stems.

  2. 2

    Cut out the four unshaded segments using sharp scissors or a craft knife. Turn the card as you cut to keep the line smooth and curved.

  3. 3

    Coat the stencil on one side with the acrylic gloss or varnish using the foam brush. Let this dry and then coat the other side. This forms a water- and paint-proof coating.

Tips and warnings

  • Change the width of the stencil's rim and stems to achieve different looks.
  • Wash the stencil with soap and water immediately after using paint or ink on it to keep it clean.
  • Apply several coats of acrylic gloss or varnish to better protect the stencil.
  • Instead of cardboard, you can use thick transparent plastic sheets, such as report covers. You will not have to seal these with the acrylic gloss or varnish.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.