Keeping a swimming pool clean greatly reduces the amount of maintenance needed and makes swimming more enjoyable. One problem that occurs when the pool has a lot of debris is that it flows through the vacuum and clogs up the skimmer at the other end. Small particles of dirt can even get through the skimmer filter. To prevent this, use a simple pair of pantyhose to catch both large debris and small dirt particles.
- Skill level:
Other People Are Reading
Things you need
- Garden hose
Cut off one leg of a pair of pantyhose using a pair of scissors. Make the cut approximately 6 to 12 inches from the toe.
Go to your pool skimmer filter, which is typically a round, plastic circle near the pool deck. Lift up to remove the cover.
Lift up the skimmer basket and stretch the pantyhose over the bottom of it so that the hose comes all the way up the sides but not over the top. Place the basket back into the ground and replace the cover.
Attach the hose of the pool vacuum to the skimmer using the vacuum's instructions. Turn the vacuum on and place it in the pool to begin vacuuming.
Wait until the pool is clean and then shut off the pool vacuum and detach it from the skimmer.
Open the skimmer cover and lift out the skimmer basket. Pull the pantyhose off the bottom and dump out any debris inside the basket. Rinse the basket with a garden hose and then replace it. Place the cover back on the skimmer.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for