The Vito 110 CDI is a model of minivan manufactured by Mercedes Benz, a German automaker based in the city of Stuttgart. The 2003 model of the van features several removable seats for increasing the vehicle's storage capacity when you need to transport large objects. Only seats which can be tipped forward can be removed from the 110 CDI minivan. Removing seats from your vehicle is uncomplicated and should only take a few minutes.
Find the release lever for the front legs of the seat, located underneath the seat.
Lift the lever upward to release the front legs from the floor.
Lift the lever to fold the seat forward, located behind the seat near the bottom. This will lift the rear legs.
Fold down the seat back so the chair is as small as possible.
Carefully lift the seat out of the car, making sure not to scratch any interior trim or paintwork with the mechanism underneath the seat.
Repeat Steps 1 to 5 for each seat you want to remove.
Fold the release handle located behind the bench seat upward.
Push the bench seat forward so the rear legs leave the floor of the car.
Lift all 3 front leg release levers upward. These levers are attached to each seat leg and are accessed from the footwell of the rear bench seat.
Tip the bench seat forward to remove it from the floor.
Carefully lift the seat out of the car via the back door, making sure not to scratch any interior trim or paintwork with the mechanism underneath the seat.