How to Set up Insignia Bluetooth Headphones

Written by si kingston
  • Share
  • Tweet
  • Share
  • Email

Insignia Bluetooth headphones can be set up to work with a computer or mobile phone. When installed, you can listen to your device from several feet away. The Insignia headphones must be configured with a device that also has Bluetooth capabilities. If your computer doesn't have Bluetooth, you can install Bluetooth software. Both the software and a special USB Bluetooth adaptor come with the Insignia headphones. If you no longer have the adaptor and installation disc, you will need to call Insignia for replacements.

Skill level:

Other People Are Reading


    Set Up With Computer

  1. 1

    Insert the AC power adaptor into the Insignia headphone Charger Connector located on the bottom of the right earphone. Insert the other end of the AC power adaptor into the power outlet and allow the headphone battery to charge. Initial charge time is around 3.5 hours.

  2. 2

    Connect the Insignia "USB Bluetooth Adapter" into the computer's USB port.

  3. 3

    Insert the provided installation disc into the computer's optical drive. The disc will begin automatically, the "Welcome Screen" will open and the necessary Bluetooth software will install on your computer. If it doesn't start, click on the "Computer/My Computer" folder located in the desktop Start menu. Click on the installation disc's drive folder and double-click on the "Setup.exe" file inside.

  4. 4

    Close the software wizard and disconnect the USB adaptor from the computer once the Bluetooth software has installed.

  5. 5

    Configure the Bluetooth software. Launch "My Bluetooth Places" from the desktop, or click the Bluetooth icon in your desktop system tray. Enter a name for your computer in the "Computer name" field and select the type of computer (e.g., laptop or desktop). Click "Next." Select the services that you want to allow the computer to share with your headphones (e.g., File Transfer or Network Access) from the list. Click "Next." Then click "Finish." Close the Bluetooth configuration screen.

  6. 6

    Press and hold the "Multifunction" button for three seconds to turn on the Insignia headset.

  7. 7

    Pair the Insignia headphones with the computer. Click on the "Bluetooth" icon in the system tray. Click "Add a Bluetooth Device." Press and hold the "Multifunction" button for more than seven seconds until you hear a short, low tone in the earphones and the blue and red LED flashes. The headphones are now discoverable and can be seen by the computer. The Insignia headphones will list under the "Select a Device" as "NS-BTHDP or NS-BTHDS" on your computer screen. Select it and select "Next."

  8. 8

    Enter the passkey "0000" into the Bluetooth Security Code field on your computer. Click "Pair Now."

  9. 9

    Check both the "Hands-Free Unit" and "Stereo Audio" when prompted and click "Next." The Insignia headphones are now ready to use. Play a video or music file on your computer and listen to it with your headphones.

    Set Up With Mobile Phone

  1. 1

    Hold the "Multifunction" button your Insignia headphones for three seconds until it turns off.

  2. 2

    Hold down the "Multifunction" button again for more than seven seconds until you hear a short, low tone from your earpiece and the blue and red LED lights begin to flash alternately.

  3. 3

    Turn on the mobile phone's Bluetooth. The steps to accomplish this vary per phone. Usually the Bluetooth menu is accessible from the Settings or Options menu on your phone's home screen. Once in the Bluetooth menu, select the option to turn the phone's Bluetooth feature on. Then select the option to find a new device in the phone's Bluetooth menu.

  4. 4

    Select the Insignia headphones from the found devices list on your mobile phone. The headphones will appear as "NS-BTHDS or NS-BTHDP."

  5. 5

    Enter the Insignia headphone's "0000" passkey into your phone when prompted. You can now listen to your mobile phone using the Insignia headphones.

Tips and warnings

  • Call Insignia to order another Bluetooth software installation disc and USB Bluetooth adaptor at: 1-877-467-4289. There may be a fee to replace these items.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.