Wiring Instructions for a Rheem 5-Wire Condenser Fan Motor

Written by louis gutierrez
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Wiring Instructions for a Rheem 5-Wire Condenser Fan Motor
The fan motor is located inside your air condenser unit. (Fan detail image by TekinT from Fotolia.com)

New, Rheem central air conditioners' condenser fan motors come with a five-wire set-up. The older condenser fan motors had only three wires. You can connect a five-wire fan motor to an older three-wire fan motor only if you buy a new capacitor. The new capacitor will replace your old capacitor, and provide you with the connections for the two extra wires.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Screwdriver

Show MoreHide

Instructions

  1. 1

    Install the new capacitor. You must buy a new capacitor that is compatible with your new Rheem 5-wire condenser fan motor. The fan motor's manual will tell you which capacitor is compatible.

  2. 2

    Connect the brown wires to the new capacitor. Connect them to the two golden screws on top of the capacitor. Secure in place with the screwdriver.

  3. 3

    Connect black fan wire to the black hot wire. You connect the fan wire motor in the terminal where the line wires connect, this is called the contactor. Screw the wire in place with the screwdriver.

  4. 4

    Connect the orange wire to the contactor. Secure it in the second terminal with your screwdriver.

  5. 5

    Connect the white wire to the contactor. Connect the white wire to where the neutral wire from the line connects. Secure it in the contactor with your screwdriver.

Tips and warnings

  • Turn off circuit breakers before working on the wiring.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.