The rear suspension on your Suzuki Marauder VZ800 compresses to compensate for bumps in the road according to your weight. The suspension springs allow for adjustment to their "preload" or precompression in order to fine-tune the way they behave under stress. The adjustment you need to make to the rear shock varies depending on how big or small you are, your riding position and how you handle the bike on the street. Learn how to adjust your VZ800's rear suspension and ensure yourself a comfortable ride every time.
Loosen the two bolts that hold on each of the rear swing arm covers using a socket and wrench. Remove the two covers and set them aside.
Locate the four Phillips head screws that hold the air box cover in place. Remove these screws and pull the air box cover from the bike. Use a socket and wrench to remove the two air box mounting bolts at the rear of the air box, then pull the entire air box away from the motorcycle. This will allow you to work with the rear suspension adjusters.
Turn the lower adjustment nut of both of the shock springs clockwise using a spanner wrench to tighten the shock springs. This will make the bike slightly less comfortable to ride but will make it handle better when taking corners at high speeds. Turn the adjustment nut of the shock springs counterclockwise to loosen the shock springs. This will make the bike more comfortable and give it a softer feel when cruising around town.
Replace the air box by bolting it in place with the mounting bolts and then replacing the air box cover using the four Phillips screws removed previously. Take your bike for a quick test ride and observe the action of the shocks. Return home and remove the air box once more to make any further adjustments necessary to get the maximum comfort from your bike for your riding style.
Replace the air box one final time when you are finished adjusting the shock preload. Use the bolts removed previously to reattach the swing arm cover on both sides of the bike, then go out for a ride to really feel the effects of your newly adjusted rear suspension.
Things you need
- Spanner wrench
- Socket set
- Phillips screwdriver