Instructions for Belt Replacement in a Proform 525Si Treadmill

Written by david clair
  • Share
  • Tweet
  • Share
  • Email

The Proform 525Si is a folding treadmill designed for regular home use. One of the primary components of the treadmill is the walking belt. If this belt should ever become damaged or broken, it will need to be replaced in order for the treadmill to operate correctly. Operating the treadmill with a damaged belt could result in injury.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Philips screwdriver

Show MoreHide

Instructions

  1. 1

    Unplug the power cord from the electrical socket.

  2. 2

    Fold the treadmill up to the raised position.

  3. 3

    Remove the four screws on the bottom of the hood. Lower the treadmill to the open position.

  4. 4

    Lift up on the right and left sides of the plastic hood that covers the motor. Remove the hood.

  5. 5

    Lift up on the inside edge of each deck side cover to unsnap it from the base. Remove the side covers and set them aside.

  6. 6

    Loosen the bolts that hold the front rollers in position. Lift the rollers up and out of the motor assembly.

  7. 7

    Loosen the bolts holding the rear rollers in place. Lift up the rear rollers. The walking belt should now be loose enough to slide off.

  8. 8

    Slide the belt off of the deck and rollers on either side.

  9. 9

    Slide the new belt onto the deck.

  10. 10

    Reposition the front and rear rollers. Tighten the bolts that hold the rollers in position.

  11. 11

    Replace the side deck covers. Press down on them until they snap into place.

  12. 12

    Replace the motor hood. Fold the treadmill to the upright position. Replace the four screws that hold the hood in place.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.