DISCOVER
×

How to Lift a Suzuki Carry

Updated July 20, 2017

A Suzuki Carry is a utility vehicle commonly used on warehouse grounds to move light loads around the area. Only the front end of this vehicle has lift points. The rear axle is the lift point for the rear. You can use a standard car jack to lift it and standard jack stands to support it. This is not a difficult job, but it must be done correctly or you will damage the frame.

Place the lift plate on the jack under the thin metal edge on the frame behind the front right wheel. Raise the front right side of the frame off the ground using a car jack.

Place a jack stand next to the car jack under the thin metal edge. Lower the front right side of the frame onto the jack stand and repeat for the front left side of the frame.

Place the jack under the right side of the rear axle right next to the rear right wheel. Raise the rear right side of the frame off the ground. Place a jack stand under the right side of the rear axle and lower the frame onto the jack stand. Repeat for the rear left side of the frame.

Things You'll Need

  • Car jack
  • 4 jack stands
bibliography-icon icon for annotation tool Cite this Article

About the Author

Living in Tucson, Ariz., Robert Good has been writing from 2003 on a wide variety of subjects ranging from sports, gardening and cooking to auto repair, home maintenance and travel. Good holds a Bachelor of Science in psychology from the University of the State of New York.