How to Paint on Cork

Written by matt goetz
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Paint on Cork
Learn how to properly paint cork. (cork image by musk from

Cork is an affordable and environmentally-friendly choice for floors and notice boards in offices and kids rooms. Cork floors provide a cushioned surface known to resist water and dents. Some people prefer to paint cork floors to brighten the naturally brown appearance, while others choose to paint a cork notice board in their kid's room for a home craft project. Painting cork not only changes the colour and style, but also prolongs its durability.

Skill level:

Things you need

  • Dust sheets
  • 220-grit sand paper
  • Tack cloth
  • Paint sealer
  • Two 5 gallon buckets
  • Stir stick
  • Two 3/4-inch paint rollers
  • Latex paint
  • Paint brush

Show MoreHide


  1. 1

    Remove furniture from the work area. If you are painting corkboard on the wall, place dust sheets on the floors below for protection against paint sprinkles.

  2. 2

    Sand the cork by hand using a folded sheet of 220-grit sand paper. Use an electric sander for sanding large areas. Remove sanding dust with a tack cloth or a damp rag.

  3. 3

    Dump paint sealer into an empty five gallon bucket. Thoroughly stir the sealer with a stir stick. Oil based sealer, or shellac, works best for sealing cork wood, but you can also use a latex primer.

  4. 4

    Dip a 3/4-inch paint roller into the bucket of sealer. The thicker nap on a 3/4-inch roller works best for textured cork surfaces. Roll the sealer over the cork, while applying pressure, to push the sealer into the holes and crevices. Allow the sealer to completely dry.

  5. 5

    Fill another empty bucket with latex paint. If you are painting cork floor tiles, it is recommended you buy quality floor paint for maximum durability. Use latex wall paint for painting a corkboard on the wall. Stir the paint thoroughly before application.

  6. 6

    Dunk a clean 3/4-inch paint roller into the paint bucket. Apply the paint until achieving a uniform surface over the cork. Allow the paint to completely dry before applying a second coat.

Tips and warnings

  • Apply sealer using a paint roller instead of a spray can of sealer. The roller method pushes the material into the surface for the best seal.
  • Use a paintbrush to apply the sealer and paint into tight corners and crevices where the roller cannot reach.
  • Do not paint cork without first applying a sealer. The sealer prevents cork from absorbing paint, which can cause the cork colour to bleed through the paint finish.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.