How to Repair Rhythm Clocks

Written by linda stamberger
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Repair Rhythm Clocks
A Grandfather clock needs maintenance to maintain rhythm. (grandfather clock image by Paul Moore from Fotolia.com)

Rhythm clocks are run on sequence, with an inner set of intricate mechanisms that enable the clock as a whole to function. The rhythm of the clock is the natural tick-tock sound, and the swinging of the pendulum in the front of the clock keeps the pace of the clock. The pendulum can be set at different levels to move the clock faster or slower. Most Grandfather clocks have this rhythm, with inner and outer mechanisms that work together.

Skill level:
Easy

Other People Are Reading

Things you need

  • Pliers
  • Clock oil
  • Cotton gloves

Show MoreHide

Instructions

  1. 1

    Open the front of the clock, if it is enclosed behind glass. Use your fingers to slide the glass casing open, or use a small pair of pliers if need be, making sure not to break the glass. Stop the rhythm clock pendulum from swinging by holding the bottom of the bob in place. If one part of the clock is off kilter, then it may affect the rhythm of the clock in general. Rhythm clocks need to be examined and properly adjusted in various sections to ensure that the clock works correctly.

  2. 2

    Put on a pair of white cotton gloves before handling the pendulum, to eliminate fingerprints that can aesthetically ruin the pendulum. Adjust the weights on the clock by putting them in their proper place if tangled. Look on the bottom of the weights to see where they are marked. Look for the left, right and centre markings, and adjust them accordingly.

  3. 3

    Use the pliers to remove the small hand, by first removing the small nut that holds the minute hand in place. Pull the minute hand forward, and off the clock face. Place a small drop of oil where the small hand was joined to the big hand, and reattach the small hand. Tighten the nut back in place making sure not to over tighten, so that the hands move freely around the clock face and keep proper rhythm.

  4. 4

    Set the time on the clock face to ensure that the chimes sound hourly, along with the rhythm. Turn the small minute hand counterclockwise, and set it on the hour you want the clock to chime.

  5. 5

    Turn the bigger hour hand counterclockwise to the 12, making sure not to overwind. Turn the bigger hand only one time. Start the pendulum swinging again to get the rhythm started. Move the pendulum to either the left or the right side. Listen for a tick-tock sound, and for the striking of the chimes on the set hour.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.