How To Increase The Range Of An RC Car

Written by cesar castro
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How To Increase The Range Of An RC Car
It's easy to improve the performance of your radio controlled car. (rc - modell image by andreas from

The fun of driving a remote controlled car can be increased by extending the range that the vehicle can be controlled from. Although most cars can drive up to 100 feet before reception starts declining, there are easy ways of extending this range. Replacing either the receiver--located inside the car--or the transmitter--the hand-held controller--will improve performance. Increasing transmitter and receiver capacity will dramatically increase the distance that the vehicle can be controlled from.

Skill level:

Other People Are Reading

Things you need

  • Screwdriver
  • Heavy duty gloves
  • Signal receiver
  • Hand-held transmitter
  • Transmitter antenna

Show MoreHide


  1. 1

    Remove the receiver installed on your remote controlled car. Using a screwdriver, unscrew the screws attaching the receiver to the car's body. Wearing heavy duty gloves, unplug the wires that connect the receiver to the car's motor or battery.

  2. 2

    Install a new higher-powered receiver into the car. HobbyPartz (see Resources) has a comprehensive list of RC car parts, including high-capacity receivers. If the new receiver's fitting does not match the pre-drilled holes in the car's chassis, simply fix it to the car with double-sided tape or a hot glue gun. Make sure to reinstall the wires, connecting the battery, motor wires and the new receiver.

  3. 3

    Buy a hand-held transmitter that is compatible with the new receiver. NitroRCZ (see Resources) has a list of high-powered transmitters. The transmitter and car receiver should be of equal power and watts to ensure proper communication. If you bought the RC parts from an electronics store, make sure to consult with an associate to ensure that the car parts are fully compatible.

Tips and warnings

  • Replace the antenna on the hand-held transmitter. A longer antenna can be purchased from the same outlets as the receiver and transmitter, and will improve signal performance. Twist off the old antenna to remove it and place the new one in its place. Twist it until it is firmly connected to the controller.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.