How to build a jig saw cutting table

Written by cicely a. richard
  • Share
  • Tweet
  • Share
  • Email

A jigsaw is a woodworking tool used for making curved cuts on plywood, metals and soft materials. Artisans use them for creating intricate designs on their works that require different shapes. Though a jigsaw is similar to a chisel, it offers more versatility to make irregular shapes and patterns that may require 45-degree angles, as well as straight cuts. Jigsaw cutting tables add stability to a handheld jigsaw, particularly when making nonlinear cuts. Jigsaw tables cost upwards of £65; however, you can build your own table using a few construction materials.

Skill level:
Moderately Challenging

Things you need

  • MDF
  • Plywood
  • Hardwood
  • Steel panel
  • Nails
  • Screws
  • Sander
  • Sandpaper
  • Saw
  • Drills

Show MoreHide


  1. 1

    Draw a sketch of your jigsaw table. A sketch gives you an idea of what you want your table to look like, what accessories you want added to it and how big you want it. A drawing also gives you an idea of how many nails and screws you need to secure. Mark the areas of the table where you want to put the saw and drill.

  2. 2

    Measure and cut MDF boards to desired size. Medium-density fiberboard, or MDF, is thicker than plywood and particle board, enabling it to withstand more pressure. It also has a flatter surface than natural woods that have knots and irregularities. Once you've cut the board, lay it out on a clean, flat surface and cut out your table legs. You may want to write down the dimensions of your table so you can remember where each piece goes. If you can't find MDP, use a three-fourth inch thick sheet of hardwood, particle board or plywood for the table.

  3. 3

    Mark spots where the opening for the saw and drills will go. Use a pencil and a ruler or straight edge to make straight lines on the material. At the same time, mark where screws and nails go on the top of the table and on the legs.

  4. 4

    Add the saw and the drills to their designated holes. Make sure the table is stable enough to hold the weight. Nail a ruler or measuring device on your table to make it an all-in-one workstation. Add a piece of board as a guider when you cut the board.

  5. 5

    Sand parts made of natural wood. If you use 2x4s or plywood, sand them to smooth out any irregular spots and remove any splinters. You can use a motorised handheld sander or sandpaper, depending on your personal preference. You can add some kind of coating to the wood or leave it natural.

Tips and warnings

  • Always wear safety gear when dealing with saws and drills.
  • Don't leave equipment running when you are not using it.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.