How to tie rope bridge knots for jrotc

Written by james t wood Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to tie rope bridge knots for jrotc
One rope can be made into a bridge with the right knots. (rope image by cherie from Fotolia.com)

The United States Army sponsors and operates the Junior Reserve Officer Training Corp (JROTC) for the stated purpose: "To motivate young people to be better citizens." A part of the training culminates in a competition wherein teams of eight JROTC cadets must cross an obstacle using one rope and only the first and last cadets are allowed to touch the obstacle. The rest of the cadets must traverse on the rope bridge. This competition requires the use of several knots in the construction of the rope bridge: the bowline, the wireman's knot, and the half-hitch.

Skill level:
Moderate

Other People Are Reading

Things you need

  • 200 feet of rappelling rope

Show MoreHide

Instructions

  1. 1

    Take the end of the rope in your right hand. Make a small loop in the rope with your left hand so the rope passes over itself (an overhand loop).

    How to tie rope bridge knots for jrotc
    A bowline acts as an anchor point. (bowline knot image by Rog999 from Fotolia.com)
  2. 2

    Feed the end of the rope through the loop with your right hand. Wrap the end around the main part of the rope from right to left passing the end behind the main part of the rope and back down through the loop.

  3. 3

    Create a large loop between the small loop and the end of the rope. This will be your anchor point for the bridge. Pull the knot tight. Alternatively the anchor loop can be wrapped around an anchor point instead of creating a free loop.

  1. 1

    Grip the middle of the rope and face the anchor point for the bridge. Hold the end of the rope that goes to the anchor in your left hand and the other end in your right hand.

  2. 2

    Loop the rope three times around your left hand for a total loop amount of about 12 inches. With your right hand grab the middle loop and place it over the loop closest to your arm.

  3. 3

    Grab the new middle and place it over the loop closest to your fingertips. Then grab the new middle rope and place it over the loop closest to your arm.

  4. 4

    Grip the new middle rope and pull it through the other loops. Remove your left hand and pull. Attach D-rings as necessary for your bridge construction to your wireman's knot before fully tightening.

  1. 1

    Wrap the rope twice around the anchor point.

    How to tie rope bridge knots for jrotc
    A half-hitch will secure the line at the end of the rope. (Knot image by FJ Medrano from Fotolia.com)
  2. 2

    Lift the end of the rope over the long section of the rope then feed it back under the long section. Pull the hitch tight.

  3. 3

    Repeat the process for a double half-hitch which will provide a secure anchor point for a rope bridge.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.