How to Replace the Backlight on My LCD TV

Written by anthony king
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace the Backlight on My LCD TV
The backlight is the heart of what makes an LCD TV work. (televisor lcd image by enens from

The LCD TV works by allowing a filtered light system in the back of the display to generate images seen on the screen. However, if the "back-light" becomes damaged or stops working, owner can be left with a very expensive paperweight. Instead of purchasing a new television, the backlight can be replaced in a few steps.

Skill level:

Other People Are Reading

Things you need

  • Replacement backlight
  • Screwdriver
  • Dremel cutting tool
  • Blow dryer
  • Grounding strap

Show MoreHide


  1. 1

    Unscrew all the screws from the back of the LCD TV. The number of screws will vary depending on the model, however, the screws will generally be found around the borders of the back casing. Gently lift the back panel off the monitor and remove any metal sheeting found underneath in order to expose the internal components of the TV.

  2. 2

    Locate and remove the backlight from the LCD. The backlight will be the long thin tube in the clear plastic casing. In a well-ventilated area, use a dremel tool to carefully cut into the end of the plastic casing nearest the end where the tube's lead connectors enter the plastic case.

  3. 3

    Heat the area where the tube's wires enter the plastic casing with a blow dryer. Once the glue that holds the wires in place is hot enough, carefully pull the wires and the tube free. Use extreme caution when handling the backlight tube as the presence of mercury vapour can cause a health risk if the tube is damaged. Make sure you perform this step in a well-ventilated area.

  4. 4

    Unscrew the reflector strip and remount the new backlight just as the old one was that you removed in Step 3. Refasten the reflector strip to the monitor and then reassemble the LCD TV's outer case by screwing it back into place.

Tips and warnings

  • It is wise to use a grounding strap while working on the inside of the LCD to avoid any static electricity, which can be transferred to the components and damage the TV.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.