How to Mount a TomTom Rider to a CBR 600

Written by si kingston
  • Share
  • Tweet
  • Share
  • Email

The TomTom Rider GPS is specifically designed to mount on motorcycles such as the Honda CBR 600 and comes with the necessary mounting supplies needed to install it. The TomTom Rider can be attached to the Honda's handlebar or to another place that may be preferable. When attaching the Rider to the CBR 600's handlebar, you will need to screw the Rider's mount into place. If the handlebar mount is not convenient, you can affix the TomTom Rider to another location along the front of the bike with adhesive.

Skill level:
Easy

Other People Are Reading

Things you need

  • Rider handlebar mounting kit or adhesive mounting kit (both kits come with the TomTom Rider)
  • Allen key
  • Phillips screwdriver

Show MoreHide

Instructions

    Mount to the CBR 600 Handlebar

  1. 1

    Unscrew the bolt from the handlebar mount with the Allen key that came with the TomTom Rider. When the bolt is removed, the mount will be able to separate into two halves, the top and bottom halves.

  2. 2

    Wrap the handlebar with the piece of rubber that came with the TomTom Rider. This will thicken the handlebar and allow the Rider mount to stay in place.

  3. 3

    Place the groove in the top half of the handlebar mount on top of the Honda CBR 600's handlebar. Fit the underside of the handlebar into the groove in the bottom half of the handlebar mount. Both sides of the mount should be aligned together, gripping the Honda's handlebar within their grooves.

  4. 4

    Reinsert the handlebar mount's screw into the screw hole and tighten it with the Allen key.

  5. 5

    Screw the Rider holder to the mount with its four screws.

  6. 6

    Open the clamp on the holder with your hand. Place your TomTom Rider into the holder bottom first. Make sure that the two teeth on the bottom of the holder meet the connections on the bottom of the Rider. Click the clamp over the Rider, securing it in place.

    Affix the CBR 600

  1. 1

    Remove the backing from the adhesive pad. Affix the pad to the back of the adhesive mount.

  2. 2

    Press and hold the adhesive mount to the place on the Honda CBR 600 that you want the TomTom Rider mounted.

  3. 3

    Screw in the Rider GPS holder into the adhesive mount with the four screws.

  4. 4

    Open the clamp on the holder with your hand. Place the TomTom Rider into the holder bottom first. Make sure that the two teeth on the bottom of the holder meet the connections on the bottom of the Rider. Then click the clamp over the Rider, securing it in place.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.