Directions for Bondo Glazing & Spot Putty

Written by c.l. rease
  • Share
  • Tweet
  • Share
  • Email

Cured body filler can contain small imperfections including thin cracks, air bubbles and indentations. Filling small imperfections without applying another coat of body filler requires a one part, thin-application-style putty. Bondo Glazing & Spot Putty allows you to use the amount of putty needed for a project without the guesswork involved with sectioning out and mixing body filler. This results in less wasted material from your project.

Skill level:

Other People Are Reading

Things you need

  • 600-grit sandpaper
  • Clean rag
  • Bondo Glazing & Spot Putty
  • Plastic putty applicator
  • 200-grit sandpaper
  • Aerosol primer

Show MoreHide


  1. 1

    Sand the surface of the damaged area with 600-grit sandpaper. Wipe sanding dust from the area with a clean rag. Make sure the rag does not contain oil or grease.

  2. 2

    Squeeze a two inch long line of Bondo Glazing & Spot Putty onto the thin blade of a plastic putty applicator. Drag the plastic putty applicator across the damaged area to spread the glazing spot putty. Smooth the putty on the damaged area.

  3. 3

    Allow the putty to cure for 30 minutes or until hard to the touch.

  4. 4

    Blend the putty into the damaged area by sanding it with 200-grit sandpaper. Wipe sanding dust from the blended putty.

  5. 5

    Run a bare hand across the repair. Apply additional spot putty if needed to create a smooth surface.

  6. 6

    Hold the nozzle of an aerosol spray can eight inches from the surface of the repair. Spray an even coat of primer on the repaired area.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.