How to Remove Granite Tiles Without Breaking

Written by lisa east hunter
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Remove Granite Tiles Without Breaking
Granite tile can be safely removed and reused. (Photos.com/Photos.com/Getty Images)

If you have grown tired of the granite tiles in your kitchen or bath, it may be time to pull them up and install something fresh and new. Granite tiles are sturdy and able to withstand significant abuse, allowing you to remove them safely from a floor, counter or wall. You can then reuse the tiles in a number of ways. Pulling up the granite without damaging it is a simple task when you use the right tools and correct procedures.

Skill level:
Moderate

Other People Are Reading

Things you need

  • Screwdriver
  • Rubber mallet
  • Broom
  • Putty knife
  • Flashlight
  • Pry bar
  • Adhesive remover
  • Metal scraper

Show MoreHide

Instructions

  1. 1

    Set the tip of a flathead screwdriver along one of the grout lines. Hammer lightly on the handle of the screwdriver with a rubber mallet until the grout cracks. Hammer until you break all the way through to the concrete floor beneath the tile.

  2. 2

    Slide the screwdriver over ¼ inch and angle the screwdriver so it is pointing toward the first crack. Hammer again until a ¼-inch piece of grout breaks free. Repeat this process until all of the grout has been knocked loose.

  3. 3

    Remove the broken grout with your hands or a broom and discard.

  4. 4

    Slide a putty knife underneath a granite tile. Jiggle the handle of the putty knife until it slides freely underneath the tile. Slide a pry bar underneath the tile and press gently to lift the tile from the floor. Repeat this process for all tiles.

  5. 5

    Lay the tiles facedown on a tarp. Spread adhesive remover on the back of each tile with an old paintbrush. Allow the adhesive remover to sit on the surface of the tiles for 30 minutes or according to the package instructions.

  6. 6

    Scrape the back of each tile with a metal scraper to remove the softened adhesive. Rinse the tiles with clean water to remove the chemical residue.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.