How to Program a ProStart Remote Starter

Written by robert ceville
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Program a ProStart Remote Starter
(Jupiterimages/liquidlibrary/Getty Images)

The ProStart remote starter comes with a four-function remote that needs to be programmed at the time of installation. It is possible for the remote to hold up to four transmitter codes within its internal memory. In order to "Code Learn" the remotes, you will need to have the car's key accessible as well. If you are not sure how to go about programming the ProStart remote, do not get frustrated. With the right instruction, you can have it coded correctly in less than five minutes.

Skill level:

Other People Are Reading

Things you need

  • Car key

Show MoreHide


  1. 1

    Open the bonnet of your car by pulling the bonnet release lever, then turn the Valet switch "Off."

  2. 2

    Turn the car on by inserting the car key and turning it forward to "On." Do not start your automobile during the programming process.

  3. 3

    Turn the Valet switch back on, and wait for the parking lights to become illuminated. They will stay lit for five seconds.

  4. 4

    Press and release the "CH1," or "Button 1," before five seconds have passed after completing the last step. You will see the parking lights flash a total of seven times, five times quickly, and two slowly.

  5. 5

    Turn your vehicle off by turning the car key backwards to "Off," then take it out completely. After closing your hood, you will be ready to use the ProStart remote.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.