How to dispose of neon lights

Written by thomas mcmurchie
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to dispose of neon lights
Recycle neon lights safely. (neon lights image by MAXFX from Fotolia.com)

Neon lights that glow red contain neon gas. Other neon lights contain helium, argon or krypton gas. The small amount of gas in these bulbs is not harmful, even if the bulb breaks. However, some of these lights contain mercury vapour, which can be hazardous. According to the Environmental Protection Agency, mercury-containing lamps are hazardous waste. Therefore, you must dispose of them in accordance with federal, state and local regulations.

Skill level:
Easy

Other People Are Reading

Things you need

  • Disposable gloves
  • Trash bags
  • Duct tape
  • Permanent marker
  • Tape
  • Piece of cardboard or stiff paper
  • Disposable wet wipes

Show MoreHide

Instructions

  1. 1

    Put on disposable gloves.

  2. 2

    Carefully remove the neon light bulb from the light fixture.

  3. 3

    Put the bulb back in its original packaging, if possible. Otherwise, place it in a trash bag, preferably with padding (e.g., paper towels or bubble wrap). Put the bag inside another trash bag. Seal the bag tightly with duct tape, and tape a label to the bag that reads "mercury light bulb."

  4. 4

    Wash your hands thoroughly with soap and water.

  5. 5

    Contact your local authorities to find out where to dispose of the bulb, or look online to find the nearest recycling centre or household hazardous waste facility in your area (see Resources).

  1. 1

    Remove people and pets from the room containing the broken neon bulb. Turn off the heating or air conditioning, open a window and leave the room for 15 minutes.

  2. 2

    Put on disposable gloves. Slide the cardboard or paper underneath the fragments of glass and powder. Deposit the fragments in a trash bag.

  3. 3

    Pick up any remaining powder and fragments with duct tape, and place the tape in the trash bag.

  4. 4

    Wipe the affected area with wet wipes. Place the wipes and gloves in the bag. Put the bag into another trash bag. Seal the bag tightly with duct tape, and label it with a sign reading "broken mercury light bulb." Wash your hands thoroughly with soap and water.

  5. 5

    Contact your local authorities to find out where to dispose of the broken bulb, or look online to find the nearest recycling centre or household hazardous waste facility in your area (see Resources).

Tips and warnings

  • Do not use a vacuum cleaner or broom to clean up broken bulbs on hard surfaces. If you must vacuum bulb fragments from a rug or carpet, discard the vacuum bag, or wipe the vacuum canister, after you finish.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.