How to Make an Arrow Holder

Written by jessica frame
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Make an Arrow Holder
Use an arrow holder to keep all arrows in one place. (tip on an arrow image by Mat Hayward from

An arrow holder, also known as a quiver, is device used to hold or carry arrows when hunting or shooting targets. There are several variations of an arrow holder, the most popular being a ground quiver, or hip-and-belt quiver. A hip-and-belt quiver is commonly used, allowing you to conveniently carry your arrows long distances. It will also keep arrows in one place, allowing for easier access when shooting at targets or hunting game.

Skill level:

Other People Are Reading

Things you need

  • 2-inch wide PVC pipe
  • Cork
  • Drill
  • Hammer
  • Nails
  • Rope

Show MoreHide


  1. 1

    Cut a piece of two-inch wide PVC pipe 18 inches long.

  2. 2

    Place a cork into one end of the PVC pipe, and place small nails into the sides of the PVC pipe where the cork is. This will hold the cork in place. The cork will form a plug in the bottom of the quiver so that the arrows do not fall through.

  3. 3

    Drill two holes about a quarter inch down from the top of the PVC pipe. Drill the holes side by side or above and below one another.

  4. 4

    Place rope through the drilled holes made in the previous step. The string should only be six to eight inches in length.

  5. 5

    Tie the rope around your belt or belt loop. Using an arrow holder tied to your belt loop makes carrying arrows easier.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.