How to Get Around the Liquid Damage in a MacBook

Written by joshua smyth
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Get Around the Liquid Damage in a MacBook
Coffee cups are dangerous things when a laptop is around. (talking on the phone image by Laser from Fotolia.com)

Most MacBook users have had a moment of panic when a cup of liquid spills near their computers. The panic is justifiable; spilt liquid can damage the interior components of the computer and leave the keyboard sticky and useless. Even worse, Apple warranties do not cover liquid damage. This can mean a very expensive repair job. It is sometimes possible, however, to avoid a shocking repair bill. With quick action, the right tools and a few peripherals, it is possible to get around liquid damage.

Skill level:
Easy

Other People Are Reading

Things you need

  • Small Philips screwdriver
  • Cotton balls
  • Hair dryer
  • Clean cloth
  • Tweezers
  • Camera
  • Rice

Show MoreHide

Instructions

  1. 1

    Shut down the computer immediately if liquid is spilt on it.

  2. 2

    Fill a large bowl with dry rice. It is very absorbent and will draw moisture from electronics that have got wet. If the liquid spilt was water, then the rice grains will draw it out without leaving sticky residue.

  3. 3

    Immerse the MacBook in the rice, taping over the DVD drive port and SD drive port to keep rice from getting trapped in them.

  4. 4

    Retrieve the MacBook from the rice 24 hours later and try to turn it on.

  1. 1

    Turn the MacBook off immediately when liquids are spilt on it.

  2. 2

    Using a small Philips screwdriver, remove the screws holding the casing together. They are located on the underside of the computer.

  3. 3

    Remove the piece of the MacBook's body surrounding the keyboard. You will see the battery with a battery lock that can be turned with the edge of a coin. Turn it and remove the battery.

  4. 4

    Pull the keyboard, disconnect it from the keyboard connector using a pair of tweezers and set it aside. This will give you access to the components of the MacBook.

  5. 5

    Pull out the memory chips. This provides access to the computer's interior. Use a hairdryer to blow air through it and dry the components.

  6. 6

    Take a picture of the MacBook's interior before removing any components.

  7. 7

    Unscrew the screws and disconnect the cables holding any components that the liquid has touched, then remove them.

  8. 8

    Wipe all the components down with a clean rag or cotton balls, dampening them as necessary to pick up the residue if the spilt liquid was coffee or soda.

  9. 9

    Use a fingernail to pop off the keys of the keyboard and clean them with a damp cloth.

  10. 10

    Pat dry all the components, then air dry them with a hairdryer set on low.

  11. 11

    Re-assemble the MacBook and turn it on.

  1. 1

    Connect a USB or Bluetooth keyboard and mouse if the spill has damaged them but left the computer functional. USB peripherals are easier if you haven't previously set up Bluetooth peripherals, as the MacBook will automatically recognise them.

  2. 2

    Connect a second monitor to your MacBook's monitor port and restart your MacBook. If the screen is damaged by liquid, an external monitor will allow you to keep using the laptop.

  3. 3

    Attach a USB DVD drive. If your drive has been damaged by liquid, USB external DVD drives are available at most computer stores. Buy one and plug it into a free USB port to use it.

  4. 4

    Remove the hard drive. If the computer has been rendered useless by water damage, the data on the hard drive may still be untouched. Open the computer by removing the screws of the case, popping it open and pulling away the keyboard and RAM chips. Unscrew the screws holding the hard drive to the motherboard and remove it.

  5. 5

    Install the MacBook hard drive in an external case with a USB port. These are available at most large computer stores. Place the hard drive in the case and connect the built-in cable to the hard drive's port. Close the case and plug it into another Mac with a USB cable. You should still be able to read the data on the hard drive.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.