Instructions for Using KW Block Sealer

Written by kim sarah
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Instructions for Using KW Block Sealer
(Jupiterimages/Comstock/Getty Images)

K&W Block Seal is used to repair leaks and holes in engine blocks, gaskets and radiators. It is an additive that will adhere to the damaged area and clog the leak. By using a block seal, you can save time and money. A typical can of the block seal will cost around £19, and the wait time for the sealer to work will be much shorter than waiting for a mechanic to get the job done for you.

Skill level:
Moderately Easy

Other People Are Reading


  1. 1

    Remove all liquid from the area to be repaired. For example, drain all coolant from a damaged radiator.

  2. 2

    Add one can of K&W sealer to the damaged car part. Fill any remaining space with water.

  3. 3

    Drive your car for at least 500 miles with the sealer in place.

  4. 4

    Drain the K&W sealer from the repaired area.

  5. 5

    Refill the repaired area with the proper fluid. For example, you can fill a radiator with coolant.

Tips and warnings

  • If removing coolant or antifreeze to do repairs, your car will have no overheating or cooling protection. Use caution when driving the 500 miles or exposing your car to extreme cold or heat.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.