How to Create a Rust Rod Paint Job

Written by alex smith
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Create a Rust Rod Paint Job
Create the appearance of rust without the corrosive damage. (rust image by jamalula from

Creating simulated rust on your hot rod is not a complicated process. It is mostly a matter of layering different colours of paint to create the final look. As most cars have iron or steel in their frames, the most convincing rust effect is simulated iron oxide, which uses a number of colours in the red/orange/brown family. Before you begin it's a good idea to take a close look at real rust to see how the colours work together.

Skill level:

Other People Are Reading

Things you need

  • Sandpaper
  • Primer
  • Sand
  • Paint
  • Paint brush
  • Water sprayer
  • Paper towels

Show MoreHide


  1. 1

    Sand the areas to be painted to ensure good adhesion. Typical places you might find rust on a car are around the wheel wells, in the cracks of doors and windows, on flat surfaces such as the hood and any other places where water can pool.

  2. 2

    Paint a layer of primer onto the sanded areas.

  3. 3

    Sprinkle fine sand onto the primer while it is still wet to help create a corroded texture. You can also use more coarse sand in the centres of the rusted areas to provide more varied texture.

  4. 4

    Allow the primer to dry overnight to permanently bond the sand to the car.

  5. 5

    Use a brush to stipple dark brown paint irregularly onto the rust areas. Allow some of the sand to show through. Allow the paint to dry.

  6. 6

    Stipple terracotta paint onto the exposed sand, feathering it lightly over the dark brown. Be careful to avoid obvious brush strokes. Allow the paint to dry.

  7. 7

    Spray water onto the rust areas, then lightly stipple on blue-grey paint. Allow the water to cause this layer to run and smear. This layer should be very thin: use a paper towel to blot off any excess. Allow the paint to dry.

  8. 8

    Spray more water onto the rust areas and lightly stipple on dull orange paint over the terracotta. This layer should only be in a few areas as it accents the rust. Again, blot off the excess with a paper towel.

Tips and warnings

  • Stippling is a painting technique in which a brush or sponge is tapped against a surface to create random blobs of paint.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.