How to Refill Epson PictureMate Cartridges

Written by ryan casima | 13/05/2017

The Epson PictureMate is one of Epson's smallest and most portable photo printers. It is shaped like a small boom box and prints 4-by-6-inch photos. The cartridge used in the Epson PictureMate is the T557. It is a rather complex cartridge as it is structured to fit in a very tiny printer. However, it does not use any of the infamous electronic chips, which makes refilling the cartridge that much simpler.

Flip open the cartridge door on the rear of the printer. Move the cartridge lever to "Release." Gently pull out the cartridge from the printer.

Place the cartridge on a few sheets of paper towel.

Peel the large white label off of the back of the cartridge. Locate the engagement tabs, which are on the top left and right corners on the ink cartridge case.

Push in the engagement tabs to remove the casing. Gently pry open the five locking tabs located in between the ink casings.

Fill the ink syringe in the refill kit with 5ml of ink. Slowly insert the syringe needle into the sponge of the ink casing and carefully force the ink into the sponge. Using too much force will expand the sponge.

Repeat Step 5 for every ink colour that needs to be refilled. Wipe the filling hole(s) with a paper towel to remove any excess ink. Close the case by snapping the locking tabs in place and replace the casing; you should hear a click from the engagement tabs when you replace the casing.

Insert the PictureMate cartridge into the printer.

Things you need

  • Ink refill kit with syringe and speciality ink for T557
  • Paper towels
  • Small flathead screwdriver

Show MoreHide

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.