Chrysler 300 Program Key Instructions

Written by michael butler
  • Share
  • Tweet
  • Share
  • Email

The Chrysler 300 comes with remote key fobs for keyless entry into the vehicle. You might want to have more than one remote programmed to your car in case you lose one, or just to store in different places. Before paying a dealer to program your second remote, consider trying to program it yourself to save a little money.

Skill level:

Things you need

  • Working remote

Show MoreHide


  1. 1

    Press the "Lock" button on your working remote five times at two second intervals.

  2. 2

    Insert your key into the ignition and turn it to the "Run" position. Do not start the engine. This is the last position before starting the car. Wait for the chimes to stop.

  3. 3

    Press the "Unlock" button on the working remote for between four and 10 seconds. While still pressing the "Unlock" button, press the "Panic" button for one second. Release both buttons. After about three seconds, a chime will sound indicating that you have entered programming mode.

  4. 4

    Press and release the "Lock" and "Unlock" buttons on the remote to be programmed simultaneously. Then, press the "Unlock" button and release it. This step must be done within 30 seconds of entering programming mode. Another chime will sound if you have done everything correctly. The remote is now programmed.

  5. 5

    Turn the ignition to the "Off" position and remove your key.

Tips and warnings

  • If you do not have a working remote for your Chrysler 300, a special computer program is required to program a remote. You will need to contact a locksmith or dealership.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.