The HP DesignJet 750C printer is a large-form inkjet plotter that is often used to print drafting and architectural drawings. If you have installed a JetDirect card on your plotter, you can connect the HP DesignJet 750C to your local network and send data to it from remote systems. Before you can begin using your HP DesignJet 750C as a network printer, you will need to configure its TCP/IP settings.
- Skill level:
Other People Are Reading
Things you need
- HP DesignJet 750C with a JetDirect card
Press the "Enter" button on the front panel of the HP DesignJet 750C.
Press the up arrow to select "I/O Setup" and then press "Enter."
Press the up arrow to select the "Modular" setting and press "Enter" again.
Press the "Enter" button when you see the "Cfg Network=No" message in the front panel. Then use the up arrow button to change the setting to "Yes" and press "Enter" to save it.
Select "Cfg TCP/IP=No" and press "Enter." Then use the up arrow button to change the setting to "Yes" and press "Enter" to save it.
Find the "BootP=Yes" menu option and press "Enter." Switch the setting to "No" and press "Enter" to return to the previous menu.
Press the up arrow once to go to the "IP byte" menu.
Use the up and down arrow buttons to specify the IP address, subnet mask and default gateway that you want to use with the plotter.
Press the "Previous" button to move backwards through the menus until you see the "Ready" message.
Hold down the up and down arrow keys to save the plotter's network configuration and print a summary page.
- 20 of the funniest online reviews ever
- 14 Biggest lies people tell in online dating sites
- Hilarious things Google thinks you're trying to search for