Instructions for lighting & extinguishing altar candles

Written by meg butler
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Instructions for lighting & extinguishing altar candles
Altar candles. (Design Pics/Valueline/Getty Images)

Altar candles are often used in Christian and other religious ceremonies. They are usually lit at the beginning of a specific prayer or point in the service and extinguished to signify the end of that portion of the service or the service itself. When multiple candles are used in a service, they are lit in a specific order. In Christian services, the candles nearest the crucifix or altar are lit first. The person in charge of candle lighting during the ceremony traditionally uses a ceremonial candle lighter to light and subsequently extinguish the candles.

Skill level:
Easy

Other People Are Reading

Things you need

  • Candle lighter
  • Matches or a lighter

Show MoreHide

Instructions

    Lighting Altar Candles

  1. 1

    Check the candle wicks to make sure that they are long enough to be easily lit once the ceremony begins.

  2. 2

    Don any required ceremonial vestments before entering the sanctuary.

  3. 3

    Light the candle lighter's taper with a lighter. Extend the taper's length using the knob on the candle lighter's handle if necessary to produce a brighter or more sustainable flame.

  4. 4

    Place your left hand near the bottom of the candle lighter's handle, and your right hand near the knob. Hold the candle lighter centred in front of you and angled forward slightly so that the flame points ahead of you.

  5. 5

    Enter the sanctuary. In many Christian ceremonies, acolytes, those in charge of lighting the ceremonial candles, are required to walk reverently and slowly towards the altar and pause for a few moments in front of the crucifix before proceeding to light the candles.

  6. 6

    Light the candles at the appropriate time in the service, in the appropriate order. As you light each candle, hold the candle lighter so that it is parallel to the floor and the taper touches the wick. Keep holding the lit taper to the candle's wick until you are sure it is well lit. Then move on to the next candle. If you are lighting candles in tandem with another person, make sure to keep pace with the other person so that you light your respective candles at the same time.

  7. 7

    Extinguish the lighting taper once all of the candles are lit by turning the candle lighter's knob and pulling the taper inside the candle lighter's stem.

    Extinguish the Altar Candles

  1. 1

    Place your left hand near the bottom of the candle lighter's handle, and your right hand near the knob. Hold the candle lighter centred in front of you and angled forward slightly so that the bell end points ahead of you and the taper end faces you.

  2. 2

    Approach the altar in the manner described in Step 5 in Section 1 if required.

  3. 3

    Extinguish each of the candles in the appropriate order, usually the opposite of the lighting order, at the right time in the ceremony. Again, keep an eye on your partner if you have one to make sure you extinguish your respective candles in tandem.

  4. 4

    Exit the sanctuary in the manner in which you entered it.

Tips and warnings

  • Put a lighter or match book in your pocket in case you must relight the candle lighter's taper.
  • Certain Christian sects require candle lighters to light their taper with the last candle before extinguishing it and carry the flame out of the sanctuary.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.