How to Cancel a Wash Cycle on a Bosch Dishwasher

Written by gail delaney
  • Share
  • Tweet
  • Share
  • Email

Robert Bosch began making Bosch appliances in 1886 and today the brand is ranked as being one of the best. If you set the Bosch dishwasher to run on the wrong cycle and need to change it, you must first cancel the current cycle. But cancelling a cycle on a Bosch dishwasher is slightly more difficult than with other dishwashers. In fact, if you aren't careful it could result in you or someone else being burnt from hot water because you need to open the door to reach the control panel.

Skill level:

Other People Are Reading


  1. 1

    Open the dishwasher door. Do not open the door all the way, just far enough to expose the control panel. Opening the door too far could result in hot water splashing out and burning you.

  2. 2

    Press and hold the "Start/Reset" button. When the active indicator light is off, release the button.

  3. 3

    Close the dishwasher door. Wait and listen for the dishwasher to finish draining. This will take about a minute.

  4. 4

    The dishwasher will beep to signal that it is done draining. Simply open the door and press the "On/Off" button. The cycle has ended and you can choose a new cycle.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.