Sony AM Loop Antenna Directions

Written by marshal m. rosenthal
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Sony AM Loop Antenna Directions
(Thinkstock/Comstock/Getty Images)

The Sony AM Loop antenna provides better reception for AM radio than if no antenna is being used at all. The procedure for attaching the antenna is straightforward and does not require reading the instruction manual that comes with it. The only requirement is that the AM radio or the audio amplifier that can play AM radio has antenna connectors on its back. No power source for the Sony AM Loop antenna is needed, either.

Skill level:
Easy

Other People Are Reading

Instructions

  1. 1

    Partially unscrew the left and right knobs from the posts beneath the text labelled "AM Ant" on the back of the AM radio or audio amplifier.

  2. 2

    Place the hooked end of one side of the Sony AM loop antenna around one of the two posts. Screw down the knob so that it is finger-tight.

  3. 3

    Place the other hooked end of the Sony AM loop antenna around the other post. Screw down the knob so that it is finger-tight.

  4. 4

    Angle the Sony AM loop antenna so that the top of the loop is facing straight up. Tighten the two knobs all the way to keep the Sony AM loop antenna in the position it has been placed in.

Don't Miss

Resources

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.