Directions to Program a Viper 474 V Remote

Written by matthew fortuna
  • Share
  • Tweet
  • Share
  • Pin
  • Email
Directions to Program a Viper 474 V Remote
Viper remotes can be programmed in seconds from your driver's seat. (Jupiterimages/Polka Dot/Getty Images)

The Viper 474V remote is among the various Viper remotes that can be programmed to control a variety of features on your car. These remotes are synced to a transmitter system that can be installed at the dealership or by an automotive store, and you can program the remotes yourself in just a few minutes from your driver's seat. This programming sequence will allow you to use your remotes right away.

Skill level:
Moderately Easy

Other People Are Reading


  1. 1

    Enter your car, leave your driver's door open and insert your key into the car's ignition. Turn the key to the "On" position.

  2. 2

    Press the "Valet" button on your remote one time to program your alarm, twice to program your boot release or three times to program your remote starter.

  3. 3

    Wait for the car horn to chirp one, two or three times (depending on the last step), and press and hold the "Valet" button again.

  4. 4

    Press and release the button on your remote that you would like to program while holding the "Valet" button.

  5. 5

    Wait for the horn to chirp again to confirm successful programming and release the "Valet" button to end the process.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.