How to replace weatherstripping on an exterior door

Written by paul massey
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to replace weatherstripping on an exterior door
(Ablestock.com/AbleStock.com/Getty Images)

Door weatherstripping helps save money on energy bills. Maintaining its efficiency means periodic replacement. The options for replacing exterior door weatherstripping range from a basic draft stop, such as adhesive foam, to more effective types, such as reinforced plastic or vinyl tubing. Regardless of the type you choose, the replacement procedure removes the old or worn out weatherstripping and restores the door's weather seal.

Skill level:
Moderately Easy

Other People Are Reading

Things you need

  • Scraper or putty knife
  • Pry bar
  • Hammer
  • Tape measure
  • Hacksaw
  • Utility knife
  • Screwdriver
  • Replacement weatherstripping kit

Show MoreHide

Instructions

  1. 1

    Open the door. Remove the all of the existing weatherstripping from the doorway. Remove any tacks or screws used to secure the old weatherstripping. Also scrape any remnants or adhesive with a putty knife or scraper.

  2. 2

    Read the correct positioning of the weatherstripping type you have, then measure the height of the door opening where the stripping will be applied, from the top surface of the door's threshold to the end point on the door jamb.

  3. 3

    Cut two lengths of weatherstripping to the door height measurement with a utility knife for vinyl types of weatherstripping or a hacksaw for metal reinforced stripping.

  4. 4

    Position one of the lengths of weatherstripping against the inside surface of the trim edge of the door jamb to check that the weatherstripping will press firmly against the door surface when closed. Then attach with the adhesive or fasteners provided.

  5. 5

    Repeat Step 4 to attach the weatherstripping to opposite side of the door opening, again checking that the weatherstripping presses firmly against the door surface when it's fully closed.

  6. 6

    Measure the width at the top of the door opening, then cut a length of weatherstripping to this dimension.

  7. 7

    Install the top piece of weatherstripping to the door jamb header using the adhesive or fasteners provided, after checking that the weatherstripping will press firmly against the door when it's closed.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.