How to Replace the Headlight Assembly in the 1999 Audi A6

Written by tara kimball Google
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace the Headlight Assembly in the 1999 Audi A6
( Images)

Keep your 1999 Audi A6 headlight assemblies clean and in good condition to receive the optimal level of light from your headlight bulbs. If an assembly is cracked or scratched, you may risk damage to the wiring system in your car if water leaks into the electrical components of the light. Buy replacement assemblies from an auto parts store or Audi dealer and replace them at home.

Skill level:

Other People Are Reading

Things you need

  • T30 Torx bit

Show MoreHide


  1. 1

    Raise the bonnet of the A6. Remove the three Torx bolts securing the assembly using a T30 Torx bit.

  2. 2

    Press the retaining tab in and pull to disconnect the wiring harnesses attached to the headlight bulbs. Twist the headlight bulbs counterclockwise then slide them out of the assembly.

  3. 3

    Pull the assembly out of the front of the car. Install the new assembly in the same orientation as the one you removed. Secure the retaining bolts and tighten them with a T30 Torx bit.

  4. 4

    Insert the headlight bulbs and turn them clockwise until they lock. Push the wiring harness connections together until they click.

  5. 5

    Repeat the process on the other light assembly if needed. Close the bonnet.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.