How to Recover a Cracked SD Memory Card

Updated April 17, 2017

Being so tiny and fragile, SD cards are susceptible to physical damage. Before you throw away your broken SD card and shed tears over the information you may have lost, use a simple procedure to fix it. Most SD cards break at the locking mechanism located near the metal connections. If this is the case, then it's an easy fix. But if it's a much larger crack (down the middle or side), unfortunately you may be out of luck, however, there's a last-ditch solution.

Locate where the locking mechanism once was, there will be a small empty groove near the metal connections.

Place a small piece of Sellotape over the grove to make it flush with the rest of the card. Do not tape over any of the metal connections.

Insert the mended card into your computer and you should now be able to recover any data that was on it prior to the crack.

Firmly press your SD card together to close the crack as much as possible.

Apply a small piece of Sellotape around the card to keep the crack closed.Do not tape over any metal connections.

Insert the SD card into your computer; if you still can't recover the information, then the card must be replaced.


If you are lucky enough to be able to recover the data from your SD card after repairing a large crack, replace the card immediately since it's very likely to break beyond repair, and next time, you may not be so lucky.

Things You'll Need

  • Sellotape
Cite this Article A tool to create a citation to reference this article Cite this Article

About the Author

Based in Victoria, British Columbia, Sebastian Malysa began his writing career in 2010. His work focuses on the general arts and appears on Answerbag and eHow. He has won a number of academic awards, most notably the CTV Award for best proposed documentary film. He holds a Master of Arts in contemporary disability theater from the University of Victoria.