How to change a headlight bulb in a chrysler sebring

Written by johnathan cronk
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to change a headlight bulb in a chrysler sebring
Replace the headlight bulb to ensure proper visibility. (Lincoln navigator headlight image by Jorge Moro from

The Sebring is a line of mid-sized vehicles designed and manufactured by the Chrysler Corporation. The Chrysler Sebring is equipped with front headlights. The headlights provide visibility to the driver and other motorists on the road during night driving and bad weather. It's important to replace the headlight bulb when it burns out to ensure safe driving.

Skill level:

Other People Are Reading

Things you need

  • Flathead screwdriver

Show MoreHide


  1. 1

    Place the Chrysler Sebring in "Park." Open the bonnet, and locate the headlight corresponding with which bulb needs to be replaced.

  2. 2

    Remove the two headlight mounting screws. Pry the fasteners off of the headlight, using a flathead screwdriver. Gently pull the headlight assembly away from the vehicle.

  3. 3

    Turn the retaining ring counterclockwise. Remove the bulb socket from the unit; once the retaining ring is off, the socket will come out easily. Remove the bulb from the socket by pulling it straight out. Discard the burnt out bulb.

  4. 4

    Push the replacement bulb into the socket; you will hear the bulb click securely into place. Replace the socket assembly, and turn the retaining ring clockwise to ensure the socket and bulb are secured.

  5. 5

    Slide the headlight assembly into place. Click the fasteners into place. Tighten and secure the two mounting screws. Close the bonnet of the Sebring.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.