How to Reset the TrailBlazer Engine Light

Written by katebo
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Reset the TrailBlazer Engine Light
(Polka Dot/Polka Dot/Getty Images)

The engine or check engine light will illuminate on the control panel of your Trailblazer when the vehicle needs routine maintenance, if there is a problem with its emissions control system or if the computer detects a change in engine performance. Take the vehicle to a mechanic or perform the necessary repairs yourself before resetting the engine light. The light must be reset manually.

Skill level:
Moderately Easy

Things you need

  • Ignition key

Show MoreHide


  1. 1

    Pop the bonnet open and locate the fuse panel cover in the engine bay. Release the cover from its retaining clips by pulling it up. Locate and remove the "PCM IGN" and "PCM BAT" fuses. Look at the diagram on the fuse panel cover to locate the correct fuses.

  2. 2

    Wait at least 5 minutes. Turn the ignition off. Replace the two fuses and reinsert the fuse panel cover. Lower the bonnet.

  3. 3

    Start the vehicle to verify that the check engine light went off.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.