How to Wire a Witter Tow Bar

Written by ann rach
  • Share
  • Tweet
  • Share
  • Email

The Witter Towbars company was founded in 1950. Today, the company manufactures towbars to fit all major vehicle manufacturers' specified attachment points. In order to install a Witter towbar on your vehicle, you must connect the wires from the end of the Witter towbar to its corresponding 7-pin towing socket. Fortunately, these wires are colour-coded to simplify the wiring process.

Skill level:
Moderate

Other People Are Reading

Instructions

  1. 1

    Connect the yellow "LD Ind" wire to connector "1" on the towing socket.

  2. 2

    Connect the blue "Fog" wire to connector "2" on the towing socket.

  3. 3

    Connect the white "Earth" wire to connector "3" on the towing socket.

  4. 4

    Connect the green "RH Ind" wire to connector "4" on the towing socket.

  5. 5

    Connect the brown "RH Tail" wire to connector "5" on the towing socket.

  6. 6

    Connect the red "Brake" wire to connector "6" on the towing socket.

  7. 7

    Connect the black "LH Tail" wire to connector "7" on the towing socket.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.