How to Program Your Remote for Verizon FIOS TV

Written by shelby winchell
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Program Your Remote for Verizon FIOS TV
You can program your Verizon FiOS remote to work with your TV and DVR. (tv image by martini from Fotolia.com)

There are five different remotes for the Verizon FiOS TV: Philips RC 1445302 and 1445301; Verizon P265; Motorola DR800 Universal Remote; and the Scientific Atlanta AT8550 AllTouch. They all allow you to change the channel, adjust the volume and, in some cases, let you record programs on a DVR if you have one. Before you can use it, the remote control must be programmed to work with your TV.

Skill level:
Easy

Other People Are Reading

Things you need

  • TV code

Show MoreHide

Instructions

  1. 1

    Turn on your TV and hold down the "TV" button on the remote control. Press "OK" while holding down "TV."

  2. 2

    Release both buttons and watch for a light on the remote control to blink twice.

  3. 3

    Find the four-digit TV code on the back of the user guide (reference section), and enter it. The remote control light will blink three times.

  4. 4

    Aim the remote control toward the TV and press "Power." If the TV turns off, you programmed the remote correctly. If the TV did not tun off, double-check the code and repeat the steps.

  1. 1

    Turn on your TV and the FiOS cable box by pressing the "Power" buttons.

  2. 2

    Press and hold "OK" and "0" on the remote control. The red LED light on the remote control will blink twice before staying lit.

  3. 3

    Find the three-digit TV code on the back of the user guide (reference section), and enter it. The remote control light will blink twice then stay on.

  4. 4

    Press "CH +" on the remote control until the TV turns off. If the TV doesn't turn off, double-check the code and repeat the steps.

  1. 1

    Press and hold the "TV" button on the Motorola remote control for six seconds. The LED light on the remote will light up and stay on.

  2. 2

    Find the four-digit TV code on the back of the user guide (reference section), and enter it (you have 10 seconds to press each digit). The remote control light will blink after you press each number.

  3. 3

    Press "Power" on the remote control to turn off the TV. If the TV turns off, you programmed the remote correctly. If it doesn't turn off, check the device code and repeat the steps.

  1. 1

    Press and hold the "Select" and "TV" buttons on the remote control until lights on the remote control blink twice.

  2. 2

    Find the code for the specific model TV you have in the back of the user manual (reference section), and enter it on the remote control. The lights on the remote will blink once a code is entered.

  3. 3

    Point the remote control at the TV and press "Power" to turn off the TV. If the TV turns off, you programmed your remote correctly. If it doesn't turn off, check the TV code and reprogram the remote by repeating the steps.

Don't Miss

Filter:
  • All types
  • Articles
  • Slideshows
  • Videos
Sort:
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the eHow.co.uk site, you consent to the use of cookies. For more information, please see our Cookie policy.