How to Override the Kodak Printer "Out of Ink" Message

Written by susan reynolds
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Override the Kodak Printer "Out of Ink" Message
Ink cartridges have built-in ink sensors. (Used ink cartridges for recycling image by itsallgood from

A Kodak printer displays an error message that reads "Out of Ink" whenever it detects that a cartridge is low on ink. It will not print if it detects a low-ink cartridge. If you have refilled a cartridge, or if you want to override the Kodak printer "Out of Ink" message to continue printing, you must reset the cartridge. Special ink cartridge chip resetters are available that tell the Kodak printer the cartridge is full, even if the cartridge is empty.

Skill level:

Other People Are Reading

Things you need

  • Kodak chip resetter
  • Cotton balls
  • Rubbing alcohol

Show MoreHide


  1. 1

    Open the Kodak printer cover. Remove the ink cartridges from the printer.

  2. 2

    Wipe the ink cartridges with a cotton ball dipped in rubbing alcohol to remove traces of ink from the metal connectors. Allow about a minute for the rubbing alcohol to dry on the cartridge.

  3. 3

    Insert the ink cartridge into the chip resetter.

  4. 4

    Press and hold down the button on the top of the chip resetter for three seconds to reset the ink counter. A green light should indicate the cartridge has been reset.

  5. 5

    Remove the cartridge from the chip resetter and insert it back into the Kodak printer. The printer should recognise the cartridge as full and print as usual.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.