How to Replace an Acer Aspire 5920 Keyboard

Written by michael wallace
  • Share
  • Tweet
  • Share
  • Pin
  • Email
How to Replace an Acer Aspire 5920 Keyboard
An Acer keyboard can be removed and replaced. (keyboard image by ayhan yildiz from

Whether you want to simply replace a damaged keyboard or disassemble your entire Acer Aspire 5920 laptop, you are going to need to remove the keyboard that is currently on the computer. The good news is that this process doesn't require a lot of time or much technical knowledge. And if you replace the keyboard on your Acer, not only will you save a lot of cash, but you may even learn a little about your computer in the process.

Skill level:

Other People Are Reading

Things you need

  • Phillips screwdriver

Show MoreHide


  1. 1

    Power off your Acer laptop and unplug the AC power cable. Close the display and turn the unit upside down.

  2. 2

    Unplug the battery pack from its compartment on the underside of the computer.

  3. 3

    Turn the computer right-side up and open the display so that you have complete access to the keyboard.

  4. 4

    Use your fingers to pry the keyboard bezel (rectangular plastic frame above the keyboard) up from its end and remove it.

  5. 5

    Use your Phillips screwdriver to remove all three screws located just above the keyboard.

  6. 6

    Lift the keyboard up and unplug the thick ribbon cable from the port in the back of the keyboard. Place the old keyboard aside.

  7. 7

    Plug the ribbon cable into the back of the new keyboard and fit the keyboard over the computer. Replace the screws, bezel and battery.

Don't Miss

  • All types
  • Articles
  • Slideshows
  • Videos
  • Most relevant
  • Most popular
  • Most recent

No articles available

No slideshows available

No videos available

By using the site, you consent to the use of cookies. For more information, please see our Cookie policy.